|
|
DAB
Single Pump
AQUAJET AUTOMATIC SELF-PRIMING PRESSURE
UNITS
Automatic water lifting units, suitable
for domestic use, small installations
for civil, agricultural, industrial,
washing and hobby applications.
The unit is equipped with a JET or
JETINOX type self-priming electro-pump,
membrane vessel, pressure switch for
automatic operation, pressure gauge,
fitting kit between pump and motor
all pre-assembled.
Tank: horizontal, 20 litre
capacity type, inner butyl membrane,
complete with stands at the bottom
and brackets for fixing the pump to
the top.
Operating range: up to 5.3 m3/h with
head up to 51 metres
Liquid temperature range: from 0°C
to + 40°C
|
|
|
CALPEDA AGAP PACKAGED BOOSTER
SETS.
The AGAP automatic pump system with
cistern is designed to meet the requirements
of the water supply unit regulations
1999 in respect of a type AB air gap
at the point of use or discharge of
'quality non-domestic water.
The units consist of brass or stainless
steel pumps with automatic control
system. Mounted on a mild steel base
with a cold water storage cistern.
The unit is designed to prevent backflows
of possible contaminated water into
the mains water system, whilst maintaining
a pressured cold water supply to the
network.
For more information please open
the attached pdf file.
|
|
|
CALPEDA Booster Pumps (fixed)
A range of fully automatic twin pump
sets with electronic control centre
and pressure switches. The sets can
be simply arranged for duty/stand-by
or duty/assist operation. The pumps
are mounted on stainless steel base
frames(where stainless steel pumps
are used) and are fully assembled
with ball valves on the suction, combination
ball and non-return valves on discharge,
along with one piece stainless steel
manifolds. The sets are complete with
pressure switches, a pressure gauge
and an 'Electromat' control panel.
All electrical equipment is pre-wired.
Supply: 400/3/50 3 wire or 230/1/50
IP54
|
|
|
Armstrong
Holden Brooke Pullen Commerical
Booster
The Multipack BMP 2000 range of cold
water booster sets are specifically
designed to provide a fully packaged
compact solution to water supply applications.
The controls are run via a microprocessor
and a pressure transducer. All models
are BMS compatible as standard.
The controls are fully programmable
with visual LCD display. The sets
are supplied with stainless steel
multistage pumps and copper manifolds
as standard.
The pump sets are capable of duties
from: 1l/s to 15l/s. and heads from
10m to 140m.
Please contact our sales office
so that we can size the correct unit
for your application.
|
